Rowing Jargon
- Back down. Term used to describe using a reverse rowing action to manoeuvre the boat backwards or for turning. Backstay. The back brace of a rigger that locks the pin in position to maintain pitch. (not found on wing rigger boats.
- Backstops. The end of the slide nearest the bow. Prevents the seat from running off the slide. Also used to describe the position at which the athlete sits with their legs straight and blade to their chest.
- Beginning. The moment at which the spoon of the blade is immersed in the water and propulsive force applied. Immersion and force application should be indistinguishable actions. Also called the Catch.
- Blade. An oar.
- Bow. End of the boat that travels through the water first and is sharpest. Athlete that sits in the seat position nearest this end of the boat.
- Bow Ball. Ball shaped safety cap that sits over the bow end of the boat. Compulsory on all rowing boats for safety of other water users.
- Bow Side. The right hand (starboard) side of the boat as the cox sits or the left hand side of the boat for a rower. Often marked by a green stripe on the oar.
- Burst. A small number of strokes (usually less than a minute) taken at full pressure in training.
- Canvas. The covered section of the boat that is from the bow to the open area (where the athlete sits) and from the open area to the stern. Often used to as a description of how much a race was won or lost by.
- Catch. See beginning.
- Collar. Plastic sleeve fixed to the oar. It can be moved along the collar to adjust blade gearing.
- Come forward’. Verbal instruction used by the cox or athlete to bring the crew to frontstops position ready to row.
- Connection. Used to describe the link between the power of an athletes legs to the force applied to the spoon of the blade. Should be made as soon as the catch is taken and held through the trunk muscles for the length of the work section of the stroke.
- Cox. Person who steers the boat by means of strings or wires attached to the rudder. Can be positioned in either the stern or bow of the boat.
- Coxless. Boat without a cox.
- Crab. When the oar becomes caught in the water at the moment of extraction and the blade handle strikes the athlete. Often causes unintentional release of the blade and significant slowing of boat speed.
- Double. Boat for two scullers.
- Easy Oar. Verbal instruction given by cox or athlete for crew to stop rowing.
- Eight. Boat for eight sweep rowers. Will always have a cox.
- Erg. Indoor rowing machine used for training.
- Extraction. The removal of the blade from the water by application of downward pressure to the blade handle. In sweep this is done with the outside hand on the blade handle. Movement easiest when force is applied to the spoon of the blade until the last moment.
- Feather. Blade spoon is flat to the water. This is the position of the blade spoon for the recovery section of the stroke. Athletes must be careful to fully extract the blade before feathering.
- Fin. A piece of metal or plastic attached to the underside of the boat towards the stern. Provides directional stability by preventing sideways slippage.
- Finish. The last part of the stroke where the blade handle is drawn in to the body. Following this (assuming clean extraction) the boat will be at its maximum speed. Force must be applied to the spoon right to the finish so that water does not catch up with the spoon.
- Firm. Term used to suggest that the athlete is applying full pressure to the power phase of their rowing stroke.
- Fixed Seat. Either a description used to differentiate a boat without a sliding seat mechanism or the athlete rowing arms and or body only and therefore not moving their seat.
- Four. Boat for four sweep rowers. Can be coxed or coxless.
- Frontstop. The end of the slide nearest the stern. Prevents the seat from running off the slide. Also used to describe the position at which the athlete sits with their legs at 90 and the blade spoon at the furthest point to the bows.
- Gate. The metal bar, tightened by a screw that closes over the swivel to secure oar.
- Gearing. Term used to describe the ratio of inboard to outboard on the blade that determines how much power the athlete can apply through the water.
- Head Race. Race in which crews are timed over a set distance. Usually run as a processional race rather than side by side.
- Heel Restraints. Attached to the heels of the shoes and to the foot plate. Compulsory safety feature that helps the athlete to release their feet from the shoe in the event of a capsize.
- Height. Measurement of distance from seat to point of work at the centre of the bottom edge of the swivel. ‘
- Hold it up’. Verbal instruction meaning to bring the boat to a stop quickly. Perform an emergency stop.
- Inboard. The length of the blade from the end of the handle to the button at the point where it will sit against the swivel.
- Lateral pitch. The outward angle of inclination of the pin to the vertical.
- Length. – Length of stroke- the arc through which the blade turns when it is in the water from catch to finish.
- Legion of Rowers. A organisation that is made up of all local rowers and past rowers for the good of rowing.
- NZR. New Zealand Rowing Association - The national organisation with the overview of NZ rowing and data bases held on their web site.
- Novice. Term used to describe someone who has very little rowing experience.
- Oar. Lever used to propel a rowing boat. Also known as a blade.
- Outboard. The length of the blade from the tip of the spoon to the button at the point where it will sit against the swivel. (Or, the engine on the coaching launch.)
- Overlap. The amount by which the scull handles overlap when an athlete holds them horizontally at right angles to the boat.
- Pair. Boat for two sweep rowers.
- Pin. The spindle on which the swivel rotates.
- Pitch. Angle of inclination of the spoon to the vertical during the propulsive phase of the stroke. This is dictated by both the stern and lateral pitch.
- Pressure. The amount of effort applied by the athlete to the power phase of the stroke. (usually light, ½, ¾, firm or full)
- Points. Points are awarded to athletes for winning races. Number of points determines the status of the athlete.
- Posture. Position of back and shoulder muscles during the stroke cycle. See section on flexibility and posture.
- Power phase. The part of the stroke between the beginning and the extraction when the blade is in the water and propelling the boat.
- Quad. Boat for four scullers.
- Rate. Or rating. Number of strokes rowed in a minute.
- Ratio. The ratio of the time taken for the power phase to that of the recovery phase of the stroke. Ideally time taken for the recovery will be about three times that of the power phase. 1:3
- Recovery. The part of the stroke phase between the extraction and the beginning or catch when the blade is out of the water.
- Regatta. A competition with events for different boat types and status athletes usually involving heats, semi finals and finals for each event. Boats compete side by side from a standing start.
- Rhythm. (Good) Optimum ratio.
- Riggers. Metal outriggers attached to the boat outer shell of the boat next to each seat that support the swivel and the pin. There are currently several different designs of rigger from two or three stay metal or carbon tubing to metal or carbon wings.
- Rigging. The way in which the riggers, slides, swivel, pins, foot plate, oars and sculls can be adjusted to optimise athlete comfort and efficiency.
- Rigger jigger. A small spanner used for attaching and adjusting riggers.
- Rowit. Web site where national and other rowing events are submitted and results recorded.
- Rudder. The device under the boat which when moved causes change of direction. Linked to the cox or a crew member by wires. Running start. A racing start undertaken with the boat already moving.
- Saxboard. The sides of the boat above the water line made to strengthen the boat where the riggers attach.
- Scull. Smaller version of the oar used for sculling.
- Sculling. Rowing with two oars.
- Shell. The smooth hull of the boat. Sometimes made from wood but more commonly now from a synthetic material.
- Slide. Two metal runners on which the seat travels. Span. The distance between the centres of the bow and stroke side swivel on a sculling boat. Spin turn. Term used to describe turning the boat on its axis.
- SIR. South Island Rowing Association - Based at Lake Ruataniwha
- Spoon. The end of the oar which enters the water. Usually painted in the colours of the club represented by the athlete.
- Square or squaring. To turn the oar so that the spoon is at 90 degrees to the water. This action should be done early during the recovery to ensure good preparation for the catch. Standing start. A racing start done from stationary.
- SRA Amateur Rowing Association. The local governing body for rowing in Southland and Whakatipu Lakes, to which all local clubs are affiliated. Approves regattas that are run under the associations rules.
- Stakeboat. An anchored boat or pontoon from which rowing boats are held prior to a race starting.
- Status. Levels of racing determined by the number of times an athlete has won a race. Athletes are awarded points for each race they win. In a crew boat status is determined by the total number of points the crew has.
- Stern. The end of the boat that travels through the water last.
- Stern pitch. Sternwards angle of inclination of the pin to the vertical.
- Stroke. One cycle of the oar. 2. The rower who sits closest to the stern of the boat in front of all the others and is responsible for the rating and rhythm of the boat. (other crew members can influence rating and rhythm from behind)
- Stroke side. The left hand (port) side of the boat as the cox sits or the right hand side of the boat for a rower. Often marked by a red stripe on the oar.
- Stretcher. A metallic or carbon plate inside the boat to which the shoes are attached. Secured with adjustable screws.
- Sweep. Rowing with one oar on one side of the boat.
- Swivel. The U shaped plastic rotating piece mounted on the pin in which the oar sits whilst rowing.
- Tap down. To the lower the hands at the end of the stroke to remove the spoon from the water.
- Tap turn. Term used to describe a method of turning the boat where each rower uses a forwards or backwards rowing action with there arms only.
- Trestles. Portable stands used to support a boat for rigging, washing, admiring etc.(Sometimes called dumps)